Flat Roof Problem? Contact us online now

Call us on: 0800 037 1108

Call us on: 0800 037 1108

Email: enq@rubberbond.co.uk


RubberBond FleeceBack Products & Accessories

RubberBond roofing systems are more than just the FleeceBack membrane. An extensive range of proven flat roof products and accessories to suit any flat roof installation are available to complete the roofing system.

Adhesives, EPDM Primer, Pressure Sensitive Tapes, Pre-formed pipe details, perimeter trims, walkways, outlets, mastics and fixings are all part of the RubberBond EPDM range. You can access the Technical Data Bulletins (TDB) and Material Safety Data Sheets (MSDS) below for viewing or download.


Pressure Sensitive Accessories

Flex-R recommends the use of Pressure Sensitive accessories due to their increased reliability, speed of installation and reduction of materials required to complete details. RubberBond PS products simplify all EPDM installations by using market leading seam tapes, overlayment tapes, flashing tapes, flashing tapes and PS accessories as an integral part of the RubberBond EPDM roofing system.

76mm PS Seam Tape

For use with RubberBond FleeceBack EPDM standard roll (non FAT) SecurTAPE is used in conjunction with HP-250 Primer to fuse EPDM membranes together in the field for long term splice strength.

Material Safety Data Sheet Technical Data Bulletin

152mm Cover Strip

A non mouldable tape used for butt jointing membranes, seaming of metal edging and other seaming detail, or simply for making repairs to cut or damaged membrane. Used in conjunction with HP-250 Primer.

Material Safety Data Sheet Technical Data Bulletin

228mm Uncured PS Tape

The un-cured EPDM tape is mouldable and adaptable to irregular surfaces capable of sealing internal and external corners, pipes, cover patches and other flat roof details. This product must be used in conjunction with HP-250 Primer.

Material Safety Data Sheet Technical Data Bulletin

EPDM Pipe Seal

Pre-fabricated pipe seals are cured EPDM pipe seals with a Pressure-Sensitive (PS) tape applied to the bottom of the pipe flange. Ideal for quick and easy flashing of pipes from 12mm up to 150mm in diameter. Must be used in conjunction with HP-250 Primer.

Material Safety Data Sheet Technical Data Bulletin

PS Moulded Walkway Pads

Designed to protect the membrane in areas exposed to repetitive foot traffic. Adhered to the membrane with three strips of pre-applied Seam Tape used in conjunction with HP-250 Primer.

Material Safety Data Sheet Technical Data Bulletin

RubberBond® FleeceBack™ EPDM 3.05m Wide Membrane with Factory Applied Tape (FAT™) and 1.52m Wide Membrane with FAT

Manufactured in two membrane sizes:
1.52m wide by 12.2m long, (18.54m²)
3.05m wide by 15.25m long, (46.51m²)

The FAT is applied to one edge of the roll, the other edge has a guide line to ensure correct overlap widths and membrane placement. FAT improves seaming productivity, completing projects faster, improving ability to get buildings 'in the dry' in less time and minimising business disruption.

The 3.05m wide roll is also available in a non FAT version and spliced with 75mm PS SecurTAPE.

Material Safety Data Sheet Technical Data Bulletin

RubberBond Adhesives and Sealants

Designed to protect the membrane in areas exposed to repetitive foot traffic. Adhered to the membrane with three strips of pre-applied Seam Tape used in conjunction with HP-250 Primer.

RubberBond HP-250 Primer

Designed for one-step cleaning and priming of surfaces prior to the application of FAT, Seam Tape, Uncured Flashing, Cover Strips and all other PS products.

Material Safety Data Sheet Technical Data Bulletin

PU Deck Adhesive

High performance ahhesive used to bond RubberBond FleeceBack to a range of substrates; plywood, OSB concrete, PIR/PUR tissue face insulation, steel, existing bitumen layer etc.

Material Safety Data Sheet Technical Data Bulletin

WBA Decking Adhesive

A high strength, acrylic adhesive allowing for fast, effective bonding of various RubberBond membranes to various flat roofing substrates.

Material Safety Data Sheet Technical Data Bulletin

Bonding Adhesive

Especially formulates for application with a spreader brush or medium nap roller. Suitable for bonding RubberBond FleeceBAck EPDM at angle changes, detailing and upstands.

Material Safety Data Sheet Technical Data Bulletin

SPB Adhesive

An alternative to standard bonding adhesive for membrane attachment to upstands and detailing. SPB adhesive is a spray applied, high-strength adhesive, formulated especially for gun application and bonding RubberBond FleeceBack EPDM to a variety of substrates.

Material Safety Data Sheet Technical Data Bulletin

Insulation Adhesive

Insulation adhesive in 750ml containers is a polyurethane foam adhesive formulated for adhering rigid insulation boards to flat roofs.






Technical Data Bulletin

Water Cut Off Mastic

Used for sealing membrane edges when creating a compression termination for RubberBond FleeceBack roofing systems. Must be used with termination bars or similar compression seal.

Material Safety Data Sheet Technical Data Bulletin

LAP Sealant

Lap sealants are extremely durable and their cured rubber consistency allows them to expand and contract like EPDM membrane.

Material Safety Data Sheet Technical Data Bulletin

One Part Pourable Sealer

Provides a durable, flexible and long lasting seal around hard to flash penetrations and roofing details.The sealants one part, pourable consistency allows for quick sealing without mixing.

Material Safety Data Sheet Technical Data Bulletin

Two Part Pourable Sealer

Designed to provide a flexible, durable and long-lasting seal around hard to flash penetrations on roofing projects. Can also be used to provide a permanent tie-in between the EPDM and a built up roof surface.

Material Safety Data Sheet Material Safety Data Sheet B Technical Data Bulletin

Weathered Membrane Cleaner

Used to clean both new and in-service EPDM membrane. Aids in loosening and removing dirt and other contaminants from the surface of EPDM membranes and leaves the surface receptive to the application of primer.

Material Safety Data Sheet Technical Data Bulletin

Sure Edge Roof Trim System

Sure Edge is a PVC-u roof trim system available in both black and white. Easy to maintain and the perfect accompaniment to all modern fascias, the trim is designed around ease of installation. Features including Built in Battening and pre-applied foam seals make it one of the most advanced and high performing trims on the market.

Sure Edge Gutter Trim with Built in Batten

The Gutter Trim and has a pre-applied foam strip for an immediate watertight seal and comes complete with a PVC-u batten which eliminates the requirement for a timber batten.

Sure Edge Gutter Trim with Standard Backplate

For installations where a timber batten is already present there is a standard backplate which fits directly to the timber batten and to which the gutter trim is secured.

Check Kerb Trim

With a Built in Batten along the top Edge top edge and pre-applied foam strip creating an immediate watertight seal, the Check Kerb Trim secures in place in seconds.

Gutter Trim Joiners

The joiners simply hook underneath the gutter trim and clip over the top creating an immediate, near seamless join.

Check Kerb Joiner

Attaches by hooking under the Check Kerb Trim and clipping over the top.

Gutter Trim Corners

Pre-formed internal and external gutter trim corners secure in place using super glue.

Check Kerb External Corner/Stop End

The Check Kerb External corner doubles as a a Check Kerb to Gutter Trim corner by leaving one blanking plate in place on the Gutter Trim side. This simple design allows the corner to be glued in place for on either corner.

Internal Gutter Trim Corner

Internal Check Kerb corners fit neatly over the top of the Check Kerb and secure in place using super glue.

RubberBond Accessories

We have a full range of accessories that make the system compatible with any flat roofing project. Fixings, drains, supports and trims, all selected to work perfectly with RubberBond FleeceBack and meeting our high quality standards.

Angled Roof Drain

Allows for drainage through parapet walls and pitched roof. The Angled Roof Drain can also be used for drainage out of a box gutter. 1m extension pipes, 90° shoes and leaf/gravel guards are optional extras.

Technical Data Bulletin

Anti Back Up Drain

This universal drain connects the roof system to a 68mm rainwater pipe and eliminates water backup.



Technical Data Bulletin

Top Drain

For connection to 110mm outlet drains using a bell and spigot join. Ideal for use with low sloping roofs, roof gardens, inverted roofs and box gutters.

Technical Data Bulletin

Plastisol Steel Trims and Termination Bar

100mm deep wall trims and 75mm-175mm deep perimeter trims. Each trim is 3m long offering an economical method of finishing the roof perimeter. Termination bars are used to create a compression seal to upstands where cutting a chase isn't possible.

Paving Support Discs

Used for installing paving slabs or decking on top of RubberBond FleeceBack flat roof systems. Designed to lift the roof terrace system 15mm above the surface allowing for a clear flow of water.

Technical Data Bulletin

RubberBond RB Fasteners and Insulation Fixings

RB fasteners are for the fixing of metal perimeter trims and securing gutter edge details. The insulation fixings incorporate a PVC tube fastener secured with a steel fixing screw.